To add Transmission Fluid to a 2014 Toyota Camry, first, ensure the vehicle is on a level surface and the engine is running. Locate the transmission dipstick, usually found near the back of the engine bay, and pull it out to check the fluid level. If it’s low, use a funnel to add the appropriate type of transmission fluid through the dipstick tube, ensuring not to overfill. After adding fluid, recheck the level and secure the dipstick.
Check the transmission fluid level.
Camry uses the same kind of fluid for both. Just make sure that you have the proper one.
Fluid is added through the dipstick tube. You will most likely need a funnel.
ask the guy at the parts store
use Dextron 11 or 111 transmission fluid. it works well in power streering
The dip stick where you check the transmission fluid. You will need a funnel. On mine if you are standing in front of the car looking at the motor the dip stick is on the right in front.
In the transmission.
It has a special bolt on the transmission pad. You have loosen it and then remove. Don't forget to put an iol pan just under the bolt.
You put the Transmission Fluid in the Transmission (fill point transmission drip stick tube)
Yes, the car must be put in Neutral gear, after going slowly though each gear.
no it wouldn't harm the transmission.
The MANUAL transaxle does not use transmission fluid. All 1994 Toyota manual transaxles use API GL-4 or GL-5 (oil grade), 75W-90 or 80W-90 (viscosity) gear oil. DO NOT USE TRANSMISSION FLUID which is meant for an automatic transaxle.