You can put it in valet mode, or find the wiring and remove it.
1. press mode (SP mode ON) 2. press mode (AL mode ON) 3. press start/stop (chime on & alarm off) 4. press start/stop (chime off & alarm off) 5. press start/stop (chime off & alarm on) 6. press start/stop (chime off & alarm off) 7. press mode (basic watch mode)
To set an alarm on the Accurist MB702S watch, press and hold the "Mode" button until the alarm setting mode activates. Use the "Adjust" button to select the hour, then press "Mode" to move to the minutes and adjust accordingly. Once you have set the desired time, press "Mode" again to confirm and exit the setting mode. Your alarm is now set and will sound at the specified time.
To turn off the alarm on your Timex Indiglo watch, press the "Mode" button until you reach the alarm setting. Once in the alarm mode, press the "Set" button to toggle the alarm on or off. You may also need to adjust the alarm time if necessary. After making your adjustments, press the "Mode" button again to exit and save your changes.
To reset the alarm on an Umbro watch, first press the "Mode" button until you reach the alarm setting mode. Then, use the "Adjust" or "Set" button to turn the alarm on or off. If you need to change the alarm time, navigate to the alarm time setting and adjust it using the "Adjust" button. Finally, press the "Mode" button again to exit and save your settings.
To set the alarm on a WR 50M watch, usually you can press the "Mode" button until you reach the alarm mode. From there, you can press the "Set" button to configure the desired alarm time. Once you have set the alarm time, remember to save the setting and activate the alarm function.
To activate the hush mode on a smoke alarm, press and hold the hush button on the alarm for a few seconds until the alarm stops sounding. This feature is designed to temporarily silence the alarm in case of a non-emergency situation, such as burnt toast.
Valet mode disables the alarm, if you want starter kill do not disable the alarm.
Yes, the alarm does work in silent mode.
to set a alarm you just press the ''MODE'' buttion
A 1993 Honda Civic alarm has an available program mode. To enable program mode place the key in the on position and press lock on the remote control 3. Do this three times in five seconds. Once in program mode the alarm can be reset.
To turn off the alarm on a C9 Champion watch, locate the mode button on the side of the watch to enter the alarm settings. Once in the alarm mode, press the adjust button to toggle the alarm on or off. Confirm the setting, and then exit the mode to return to the normal time display. If needed, refer to the watch's manual for specific instructions based on the model.