That question would take a long time to answer and consume many pages. Better to purchase a reference manual such as Chilton's, Motors, or Haynes and read the information provided.
About $1700.
.002" is what I have on a fresh rebuild.
Buy a rebuild kit and remove all of the old parts, replacing them with the new ones.
the late model 350 and the early model 350 are basically the same. there might be little differences but not many.
Is there a manual to rebuild a 350 turbo transmission on a 1977 Chevy Truck on line that I can order or down load for free I think if you got to Chevy truck parts .com you can find one
everybody has a 350 but not everyone has a 396, the 396 is a lot more expensive to rebuild but the torque from that big block is worth it.
You must replace the piston rings. That means TIME FOR A REBUILD.
i just rebuilt a 350 cost with head work $600.00 and it was done right greg
A lot depends on your location and the type of rebuild you're planning. In my area of the mid-atlantic states a stock rebuild from a transmission shop including installation would run about $1500.
If your Turbo 350 (TH350) has no forward gears but still has reverse, common causes are: π§ Forward clutch pack burned or failed (most common) π οΈ Broken forward clutch piston seals βοΈ Valve body issue (stuck valve) π§ Low or burnt transmission fluid π§± Sheared input shaft or stripped splines If reverse works strong but all forward gears are gone, itβs usually the forward clutch pack and likely needs a rebuild.
no unless so one make a kit to do that tranadap.com 400 trans is longer than 350trans best to rebuild 350 trans i can rebuild for 500.00 you will have better trans then bsnward@yahoo.com
Nothing. They are all the same length