how do i change the front bumper on my 1999 vauxhall vetra
== ==
buy a new bumper, remove the old one, and attach the new bumper
Remove the front bumper fascia.Unplug the horn electrical connector and remove the bracket bolt.
Remove rear bumper on 99 ford tarrus
* Raise and support the fron of car securely on jackstands * Disconnect the bumper fascia from the left and right wheel well splash shield * Detach the bumper fascia from the fenders by removeing the two bolts * Disconect the bumper fascia from the front impact bar * Before removing the bumper fascia unplug the electrical connectors for the turn signals and parking lights * Remove the bumper fascia * To remove the front bumper energy absorber drill out all nine pop rivets * To remove the front bumper impact bar simply remove the four impact bar retaining nuts * Installation is reverse of removal.If you removed the absorber you will need new pop rivets
To remove the front bumper on a zx2 , first you need to remove all of the fasteners on the top side of the bumper. ( open the hood and look straight down, remove all of those black plastic retaing screws.) After you remove the fasteners from the topyou need to lay down and get all of those small screws on the bottom/front of the bumper. Basically they just hold on the front splash guard but you need to remove them anyways. Once you take care of the top and bottom side of the bumper you need to remove both of the front inner fender wells. It's usually easier if you remove the wheels first. Once you remove the inner fender wells, get you a 3/8 drive ratchet wrench with a LONG extension. There are two (2) bolts on each side of the bumper, I believe they are a 13mm. Take out all four (4) bolts and then remove the front bumper cover and your done.
On the bumper there should be a wiper arm. If you then press it down, it should be come off quite easily. Also, it would help to bring the car in to a mechanic.
# Unplug the electrical connectors and remove the halogen bulbs # Remove the front combination (park and turn signal) light housing and the screws along the top of the front bumper cover # Remove the headlight housing mounting bolts and remove the housing
You will need to remove the front grill and the whole front bumper to access the headlamp housing. It's quite easy once you've done it.
No, they do not have the same chassis.
Under the front, behind the bumper.