using hammer
Did you check behind the glove vcompartment as in other models?
Ah, the Nissan Almera 2004, what a lovely car. To torque the cylinder head properly, you'll want to set it to around 65-72 ft-lbs in a criss-cross pattern to ensure even pressure. Just remember to tighten them gradually and with care, like adding happy little clouds to a painting. Happy torquing!
u have to remove the rear deck lid, speakers r underneath how do you remove the rear deck lid on the 2005 Nissan altima
To set the clock on a 2005 Nissan Almera SE, first, turn on the ignition without starting the engine. Locate the clock adjustment buttons on the dashboard; typically, there are buttons labeled "H" for hours and "M" for minutes. Press and hold the "H" button to set the hour and the "M" button to set the minutes. Once the desired time is displayed, simply release the buttons, and the clock will be set.
with the lug wrench!
Try of anyway until you discover the issue. Nissan will give you an award if you find out.
It's a chain. Be careful though, it's a faulty Renault timing chain. It's stretches and causes the engine to stall and not start. It's very expensive to repaire as engine needs to be stripped. Nissan are yet to issue a recall for this model.
Remove the bottom backseat, you should see it there.
You have to remove the front bumper, remove the headlight assembly. then take the fog light bulb out.
The 2005 Nissan Altima auto tensioner pulley can be removed by removing the center bolt. You will need to hold the pulley stationary while you loosen the bolt.
You need to refer to your manual if you want to remove the inner rod end on front of 2005 Nissan Sentra 1.8s.
where is the jack in a 2005 nissan murano