0
What else can I help you with?
What is the capacity of a Kenmore 70 series washer model number 22722?
agitator not working
How do you remove the agitator of a speed queen washer?
To remove the agitator of a Speed Queen washer, first, unplug the machine. Then, remove the fabric softener dispenser on top of the agitator and bolt or nut securing it. Next, grasp the bottom of the agitator and pull up firmly to detach it from the drive shaft.
How do you remove the back of a Kenmore washer?
A 5/16 nut driver.
What causes the agitator in a washing machine stop working?
It depends on what type of washer it is. If it's a GE model, and the motor / transmission is good most likely your problem is the Agitator Coupler which is located beneath the agitator If the washer is made by Whirlpool / Kenmore and the motor / transmission is good most likely your problem is the Agitator Dogs which are located inside the agitator Both are easy and inexpensive fixes
How do you remove the cam agitator on whirlpool washer?
From: http://www.fixya.com/support/t1942223-one_part_agitator_moves_other_part Remove Dispenser or Cap: Some models of washing machines utilize a fabric softener dispenser that resides on top of the agitator. This dispenser simply snaps onto the top of the agitator. Other styles utilize a decorative cap. To remove the dispenser, simply grab it and firmly pull up. To remove the agitator cap, insert a small flat-head screw driver into the seam between the agitator cap and the upper agitator (mover). Use a twisting or prying action to pop the cap off of the agitator. Remove Internal Debris Cap: Inside the agitator you will see a cap with a raised handle, much like that of your automobile. Simply reach into the agitator and twist the cap while pulling up. This will remove the cap and its o-ring. Remove Agitator Stud: When looking into the agitator assembly, you will notice a single nut in the center of the agitator. Use a socket kit or nut driver to remove this bolt (agitator stud). Remove the Upper Agitator (Mover): With the bolt removed you should be able to remove the upper half of the agitator (mover) by simply pulling up. Sometimes pulling up will actually remove the whole agitator assembly. If this happens, place the Lower Agitator on the floor and stand on the flat lip. Then Pull up to separate the Upper Agitator (mover) from the Lower Agitator. Remove the Cam and Clutch Dogs: When you remove the upper agitator (mover) it contains the cam and clutch dogs. Tun the assembly upside down. The cam and dogs should then come out.
What is cubic foot capacity of Kenmore washer model 110?
Kenmore model 110.9259600 washer capacity
How do you put agitator in a sentence?
Example sentence - The agitator in the washer was not working properly until the repair man fixed it.
How can you get to the small open space beneath the agitator of a Kenmore Elite washing machine?
agitator cap can be unscrewed, then the retaining nut removed, then the agitator pedestal can be pulled up off the drive splines.
What is the capacity of Kenmore 110.26914690 washer?
Depending on the Series.. Most are 3.2 Cu ft
What is cubic capacity of Kenmore washer 110.27062600?
The cubic capacity of a Kenmore washer 110.27062600 is approximately 3.4 cubic feet.
What is cubic foot capacity of Kenmore washer model 11042822201?
What is cubic foot capacity of Kenmore washer moodel 110.42822 201
What should I do if my Kenmore Elite washer displays the UE code?
If your Kenmore Elite washer displays the UE code, it means there is an unbalanced load. To resolve this issue, try redistributing the clothes inside the washer to balance the load. If the problem persists, you may need to remove some items or adjust the load size.
