I bought a small flat blade screwdriver and stuck in on the side of one of the page turning keys to pry it open. Once you get the screwdriver underneath of it, it comes off easily and if you find a small enough flat blade screwdriver, you shouldn't cause any damage.
How to remove battery cover to replace battery
Remove the seat. Remove the battery. Replace the battery. Replace the seat.
Remove - battery cable Remove + battery cable Remove hold-down bolt on front bottom of battery tray Remove battery
First a person would have to buy a replacement battery for this item. Then remove the face, remove the white plastic with a screwdriver, remove the screen, remove the battery, replace the battery, and put everything back on where it belongs.
Open your car hood. Remove the black (-) negative cable from the old battery . remove the positive(+) cable from old battery . remove the two small nuts which hold the battery in place . remove old battery . replace with new battery . reverse directions for installion .
Battery is located on the passeger side. Remove the air filter that covers it. Remove negative cable on left side of battery. Then remove positive cable on right. Then remove battery drain tube on left side of battery. Remove two nuts on positive side of battery on clamp that secures it to vehicle. Remove battery and replace with new one. Then secure battery clamp with two nuts remove. Then replace drain tube, positive and then negative cables. Last replace air filter over battery.
remove seat, remove neg cable from frame and Pos from battery, remove strap and take out battery.
Ensure the device is switched off. Then, remove the battery cover. Remove the old battery from the device and replace it with a new one. Replace the cover and power back up to ensure the new battery is working.
Remove the seat, remove the cables replace the battery. reinstall everything.
You have to remove the black plastic rivets on the winshield washer fluid container that sits above the battery and remove it. you will then see that battery and be able to replace it.
Remove the driver side front wheel, remove the inner fender liner, remove the tie down bracket, remove the battery cables and then the battery
The voltage regualtor is part of the engine computer. You will have to replace it. You will need to remove the battery to access.The voltage regualtor is part of the engine computer. You will have to replace it. You will need to remove the battery to access.