Remove the seat. Remove the battery. Replace the battery. Replace the seat.
Under the seat.
what model? 2005 HD Road King Custom
Beneath the seat and middle of the frame.
You will need to add an aftermarket onboard charger and route the power cord to an easily accessible spot on the bike.
Four quarts.
it has a main circuit breaker in front of the battery
For a 1998 Harley-Davidson Road King, you typically need a maintenance-free 12V battery, specifically a group size of 27 or 20. The most common option is the Harley-Davidson OEM battery, which is a Yuasa YTX20HL-BS or similar. Always check your owner’s manual for specific recommendations and ensure the battery meets the required specifications for your motorcycle's electrical system.
To change the ignition switch on a 2000 Harley Davidson Road King, first disconnect the battery to ensure safety. Remove the switch assembly by unscrewing the retaining screws and disconnecting the wiring harness. Install the new ignition switch by connecting the wiring harness and securing it with screws. Finally, reconnect the battery and test the new switch to ensure it operates correctly.
All Harley-Davidson Road King models are belt driven.
332 kilos or 731.9 pounds (dry).
blown fuse
On a 2005 Harley-Davidson Road King, the fuse panel is typically located under the seat. To access it, you need to remove the seat by loosening the mounting bolts. Once the seat is off, you'll find the fuse panel mounted on the right side of the bike, near the battery.