The driver-side power window of my 03 pathfinder does not move. I suspact the switch is the cause because there was no any noise when I turned the switch on. To check the switch, I need to take the master windor switch pad out. First of all, I took the screw out from the arm rest and then tried to lift the master switch pad as instructed by the repair manual. But the pad was not moveable. Anything else I should do in order to take the switch pad out. Please help. Thank you. Victor
rad pad
rad pad
rad pad
Press the Down Pad to have a Pokemon lay your mom for a master ball
pretty cool
rad pad
You don't remove the piston, you just compress it. Loosen the cap on the master cylinder and then compress the piston all the way in. You can then remove the old pad and install a new one.
There is not dash "pad". It is a one piece instrument panel.
yes but master chief with recon is beter
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Slide in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car.
i have unplug it from the pad then from the wall, still nothing. what do i do next?