To remove the rear bumper on a 2003 Ford Ranger, start by locating and removing the bolts that secure the bumper to the frame, typically found on both sides and underneath. You'll also need to disconnect any wiring for the tail lights or bumper sensors if applicable. After all bolts are removed, gently pull the bumper away from the vehicle. It's advisable to have a second person assist to avoid any damage while removing the bumper.
Unbolt it :)
how to remove 2013 passat rear bumper
yes
Remove rear bumper on 99 ford tarrus
how do you remove and replace rear bumper on an xtype jag
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
Removing the Rear Bumper of a Passat...
The 1992 Mercedes-Benz 300 rear bumper is held in place with eight retaining bolts. You can remove the rear bumper by removing the retaining bolts.
The 1994 Ford Explorer rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off.
To remove the rear bumper cover on a 2003 Honda Odyssey, start by disconnecting the negative battery cable for safety. Next, remove the screws and clips securing the bumper cover, which are typically located in the wheel wells and under the rear of the vehicle. Carefully pull the bumper cover away from the vehicle, ensuring to disconnect any electrical connectors for reverse lights if applicable. Finally, gently detach the cover from the vehicle, taking care not to damage any surrounding components.
There is a site that shows how to remove the rear bumper in an Accord but it is NOT the 2002 but the 2003 model. I don't know how much different this would be but it might give soe insight. The link is www.cardomain.com/ride/650229/3
The rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off. Reverse the process to install your new rear bumper.