0
95% of the time in any vehicle there are 2 spots where relays usually are located
1. under the dashboard on the drivers side
2.under the hood in the big black fuse panel, usually if you lift the lid of the panel up it will indicate which fuse # is the relays and what spot its located in, inside the fuse panel. in some cases i've seen relays attached to the firewall by itself running of a tri-wire setup from the main wiring harness.
hope this helps. also if you have a manual for this truck it will tell you where its located, or a hans manual
What else can I help you with?
Where are the starter mounting bolts on a 94 Toyota 4x4 pickup?
The 1994 Toyota pickup truck starter mounting bolts can be found on the head of the starter. There will be three mounting bolts.
Where is THE Starter on 1987 Toyota pickup?
attached to the battery. bolted to the engine
Starter location on a 1983 Toyota pickup?
Look at the lower end of engine
Will a Toyota 22r starter fit a evo harley motor?
I use a starter solenoid from a 1991 - 1995 Toyota Pickup on my 1998 FLHT Evo... and a fraction of the cost from Harley.
Where is the fuel filter located on a Toyota pickup 4wd with 22R-E engine?
above the starter
Where is the starter located on a 1989 Toyota pickup v-6?
the starter is located under the right front wheel well. remove the tire and you can see it.
Will 4cylinder motor out of 94 Nissan pickup fit in a 88 Nissan pickup that currently has blown Z24 engine?
it will fit... minor alterations (toyota engines work too), but you're much better off finding another z24 or rebuilding your old one.
How do check the oxygen sensor on a 1989 Nissan pickup 4cylinder?
install a new one!!
Is a 1995 Nissan pickup 4cylinder 2wd transmission intechangeable with a 1997 4wd transmission?
no sir.
What is the Bolt size for a 1986 Toyota pickup starter?
10 m.m x 1.25 x 1 1/2 long
Will a transmission from a 1993 Toyota pickup fit in a 1994 pickup?
A transmission from a 1993 Toyota pickup will fit into a 1994 Toyota pickup. The Toyota transmission will not fit in to other makes and models of pickups.
How do you remove the starter on a 1996 Toyota T100 4x4 pickup?
To remove the starter on a 1996 Toyota T100 4x4 pickup, first disconnect the negative battery cable to ensure safety. Then, locate the starter under the vehicle, typically near the transmission. Remove the bolts securing the starter to the engine, and disconnect the electrical connections, including the main power cable and the solenoid wire. Once all connections are free and the bolts are removed, the starter can be taken out from its mounting position.
