0
1.Apply parking brake raise vehicle and support it 2.Disconnect the negative battery cable and then the positive cable and wait two minutes before proceeding any more 3.Remove the retaining screws securing .the air deflector and the upper side of the bumper. 4.Remove the turn signal light housings 5.Detach the screws securing lower side of the bumper cover 6.Once the cover is removed,remove the retaining bolts or nuts and detach the bumper assembly.The bumper is retained by teo bolts at each end.
What else can I help you with?
How do you remove the front bumper from a 2002 Hyundai Santa Fe?
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
How do you remove headlight assembly 1999 elantra?
# Unplug the electrical connectors and remove the halogen bulbs # Remove the front combination (park and turn signal) light housing and the screws along the top of the front bumper cover # Remove the headlight housing mounting bolts and remove the housing
How do you remove front bumper from 1994 Intrepid?
Unbolt the front of the wheel well liner inside the wheel opening.Remove the bumper cover bolt from the bracket located inside of the bumper at the end.AT the front of the car, remove the bolts holding the bumper cover on, located underneath the vehicle.You should now be able to remove the bumper cover from the front of your Dodge Intrepid.An instructional video has been included to show you the removal process.
How do you remove front bow tie emblem cobalt?
Not Necessary but helps a lot: Jack the front of the car up on both sides and remove the front wheels. Remove the bolts that hold the plastic fender well up. If you look at the seam where the front bumper cover meets the right front corner panel (one's metal and one's plastic) there are more bolts to remove. Pop the hood, and remove the push locks that hold the plastic bumper to the metal frame in front of the engine on top of the radiator. The front bumper cover should fall off (if you don't want it scratched lay a towel down in front to lay the bumper on. From there, remove the two bolts that hold the front Chevy symbol to the bumper cover. and pop it off.
How do you remove front bumper cover on 2000 impala?
Park the Impala on a level surface and engage the parking brake. Remove the keys from the vehicle's ignition.Crawl underneath the front of the vehicle and use a slotted screwdriver to pry off the splash shield in each wheel well directly in front of both front tires. Once the shields are removed, you can access the screws securing the bumper cover to the fender.Remove the two screws on each side of the bumper cover with a Phillips screwdriver.Remove the bumper cover from the front of the vehicle by pulling it up and off the Impala. You may need another person to help you remove the bumper cover. Install a new bumper cover by placing it onto the front of the Impala.Crawl underneath the Impala again and reinstall the two screws on each side of the bumper cover. Reattach the splash shields to the wheel wells.
How do you remove the front bumper cover on a 2003 Santa Fe?
throw a hand grenade at it
How does one remove a front bumper from a 1997 Jeep Grand Cherokee?
First remove the bumper cover. You need to take off the front grill to get at the plastic retainers that hold the top of the buimber on. There are about four retainers on the bootom of the bumper.
How do you remove a bumper from a Honda Accord?
This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.
How do you remove driver side front fender off a 1999 elantra?
1. Raise the car and support it securely on jack stands and remove the wheel 2. Remove the turn signal housing and front bumper cover 3. Detach the screws then remove the inner fenderwell 4. Open the hood and remove the fender-to-body bolts 5. Detach the fender
How do you Remove the front bumper cover on an 2005 ford mustang?
# Apply parking brake,raise the vehicle and secure it # working under the vehicle,detach the fasteners securing the lower edges of the bumper cover # Working in the front wheel opening,detach the retaining screws securring the bumper cover to the inner fenderwell splash shield # Pry out the lower edge of the splash shield,then reach up behind the bumper cover and remove the bumper cover fender retaining nuts # remove the fasteners securing the upper portion of the bumper cover and pull the bumper cover assembly out and away from the vehicle. # Disconnect any electrical connections which would interfere with removal
How do you remove a citroen berlingo front bumper?
how to remove front bumper on citroen berlingo
How do you remove front bumper on 2002 impala?
how to remove front bumper 2002 Impala
