0
What else can I help you with?
How do you remove the front bumper on a 2004 dodge Dakota?
Support the bumper with a jack or jackstandWith an assistant supporting the bumper remove the bolts/nuts retaining the bumper to the frameRemove the inner bumper bracket mounting bolts and the push-in fastners securing the air deflector to the bottom of the bumper fasciaDisconnect any wiring harnesses that would interfere with bumper removal and detach the bumper
How do you remove a dodge nitro front bumper?
To remove the front bumper of a Dodge Nitro, start by disconnecting the negative battery terminal for safety. Next, remove any screws or bolts securing the bumper to the vehicle, which are typically located in the wheel wells and under the front fascia. Carefully pull the bumper away from the vehicle, making sure to detach any clips or connectors, such as those for fog lights or sensors. Finally, lift the bumper off the vehicle and set it aside.
How do you remove front bumper from 1994 Intrepid?
Unbolt the front of the wheel well liner inside the wheel opening.Remove the bumper cover bolt from the bracket located inside of the bumper at the end.AT the front of the car, remove the bolts holding the bumper cover on, located underneath the vehicle.You should now be able to remove the bumper cover from the front of your Dodge Intrepid.An instructional video has been included to show you the removal process.
How do you remove a fender and bumper from a 1998 Dodge Dakota pickup?
You have to have a little mechanic ability to unbolt them and reinstall them. ^^^^that is a given, here is a step by step instruction on how to remove the bumper on a Dodge Dakota 98-99 (i'm sure it's the same for a few other years mainly generation 2 Dakota's), and a list of tools needed. Tools needed: 18 mm Socket and a ratchet WD-40/PB Blaster #2 Phillips bit screwdriver / flat head (in order to remove bumper cover) how to remove the bumper: 1.) pop your hood and open it all the way 2.) look down in front of your coolant overflow tank and just to the left of the radiator 3.) remove the four 18mm bolts from bumper 4.) pull bumper out (if you need to remove the brakets that the bumper is bolted to then you need a T50 star bit and a 3/4 inch socket with a 6" extention)
How do you remove a citroen berlingo front bumper?
how to remove front bumper on citroen berlingo
How do you remove front bumper on 2002 impala?
how to remove front bumper 2002 Impala
How do you remove the front bumper on your 2001 Dodge Neon SE?
Haynes repair manual, Dodge Neon 2000 thru 2003. Book #30036
How do you remove front bumper from 1999 dodge Dakota slt v8 magnum?
you need a socket set with an extension 1. open the hood 2. located the 4 bolts holding on the bumper just in front of the radiator 3. remove one bolt from each side 4. have a friend hold one side of the bumper while you remove the last 2 bolts having a friend there is important cuz dak bumpers are oddly weighted and hard to carry by your self
Does a 2001 Dodge Dakota bumper cover fit on a 2003 Dakota?
Quite simply YES. The fog lights may be different. I replaced my 2003 factory front and rear covers with painted ones from my 1998 Dakota
Where is the coolant reservoir for a 2002 dodge Dakota?
For the 98 it is right behind the front bumper between the driver side headlight and the radiator. Sorry if this doesn't help.
How do you change the front seal on an automatic transmission in a 1996 dodge Dakota?
you have to remove trans.after trans is removed remove tork.conv.check bushing in front pump you will find that it is bad
Need to know how to remove front bumper of dodge ram 2001 sport?
# Support bumper with a jack or jackstand # With an assistant supporting the bumper remove the bolts,nuts and stud plates retaining the bumper to the frame # Disconnect any ireing harnesses or any other components that would interfere and detach the bumper
