The name of the AC hose for a BMW 323i is the AC vacuum hose. The hose can also be called the AC pump pressure hose.
You will need to remove the ac compressor, alternator, and the bracket underneath them to access the bypass hose.You will need to remove the ac compressor, alternator, and the bracket underneath them to access the bypass hose.
You have to remove the air conditioning compressor bolts set the unit aside but do not remove the freeon hose. Then remove the mounting bracket and then you can get to the bypass hose to replace it. Replace mounting bracket and compressor and job is complete
How do I remove the screw/bolt holding the AC unit lines to the radiator on the driver side.
To replace the AC hose on a 2002 Ford Escape, first, ensure the vehicle is off and the AC system is fully discharged. Remove any necessary components for access, such as the engine cover or air intake duct. Disconnect the old hose by loosening the fittings using the appropriate tools, then install the new hose by securing it tightly to the fittings. Finally, recharge the AC system with refrigerant and check for leaks.
how to replace ac hose assembly on 2005 jeep liberty
The AC compressor on a 92 Acura Legend is removed by vacuuming out the refrigerant, disconnecting the wiring, and unscrewing the AC hose. The compressor can then be unbolted and pulled from the engine.
Remove the bottom hose from the evaporater at the firewall, pull out the expansion valve, i highly recommend flushing out the system to remove excess sludge. Replace the valve and the hose.
Below the AC compressor. Follow the hose at the bottom of the radiator and the housing it is connected to is what you need to remove.
Remove the drain hose from underneath the car on passenger side. usedcompressed air . www.lextechautomotivellc.com
You need to remove the ac compressor, alternator, and their mounting bracket.
A portable AC hose kit typically includes a hose, window adapter, and connectors for easy installation and ventilation of the air conditioner.