A brake Job should not be done without a manual till you learn your Vehicle. Plus is needs to be done correctly because your life and the lives of others depend on it. So Please get one if your local auto parts doesn't have one try [http://www.themotorbookstore.com/Isuzu.html Here] Good Luck and Remember.
Change Your Mind, Not Your Oil.
Use the First In Synthetic Motor Oil's.
See My Bio For Information & Contact Details.
adjusting Isuzu rodeo brakes
2000 Isuzu Rodeo brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
remove the 2 screws from the red plastic and gently pry the red cover off.
DOT 3
1989-2002 Isuzu Rodeo and/or Honda Passport brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
There is a third screw between the brake light and the bumper.
How to Install Front Brake Pads Check Related links below.
To change the brake bulb on a 1994 Isuzu Rodeo, first, open the rear hatch and locate the taillight assembly. Remove the screws or clips securing the taillight, then gently pull it out to access the bulb sockets. Twist the socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it's securely in place. Reassemble the taillight and test the brake lights before closing everything up.
To replace the brake light on a 2000 Isuzu Rodeo, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips holding the assembly in place and gently pull it out. Twist the bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it's securely fitted. Finally, reassemble the tail light by reversing the steps and test the new brake light to ensure it works.
Check the bulbs they are double filamented with smaller being for brake lights
its either a bad caliper or the the brake hose itself could be bad
I don't think that will work unless you change over to rear disc brakes, the hub should not match.