To replace the brake light on a 2000 Isuzu Rodeo, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips holding the assembly in place and gently pull it out. Twist the bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it's securely fitted. Finally, reassemble the tail light by reversing the steps and test the new brake light to ensure it works.
adjusting Isuzu rodeo brakes
If its the bulb you have to unscrew the light cover and pull out the old bulb and put the new one in.Then screw the cover back on.
How I can replace ignition switch cylinder from Isuzu Rodeo?.
how do you replace coolant temp sensor on a rodeo
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
It means the Anti Lock Brake system isn't working properly
Replace Replace
I don't think that will work unless you change over to rear disc brakes, the hub should not match.
You have to remove the entire light assy. There are some screws that are hard to find but they are there. accessed from the outside 3 in all use a medium length Phillips screwdriver. GoodluckJoe
how do you remove transmission in 1999 rodeo
2000 Isuzu Rodeo brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
2004 3.5 Isuzu rodeo 2wd reduce power light