Well, isn't that a happy little question! To remove the rear quarter panel on your 1996 Mitsubishi Eclipse, you'll first want to gather your tools and find a safe, well-lit workspace. Take your time, be gentle with the clips and screws, and remember, there are no mistakes, just happy accidents. Happy crafting!
To remove the instrument panel from the 1998 Mitsubishi Eclipse, carefully pull back the pod. Take care not to lose any of the clips.
I just need to figure out how to take my door panels off my car, 2000 Mitsubishi Eclipse, so I can install some new speakers.
To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.
You need to remove the rear seat and the panel covering the speaker. Before removing the panel make sure that you have removed all screws. Pay attention to the clips holding the panel as well.
You need to remove the dash panel. It will allow you to get access to many connectors and it will be easier to remove the harness.
The fuel pump is located inside the gas tank remove back seat to find access panel
You have to remove the upper panel, third row seat, peal back the cargo area carpet and unscrew and pop it off. It take about an hour to two to remove and get to the speaker.
The 1999 Mitsubishi Eclipse OBD 2 port is on lower right edge of dash; next to kick panel
driver side under steerling wheel panel
It is on the passenger side beneath the rocker panel.
pray
Look under the panel where the dashlights are, there should be 2 screws.