Remove the door speaker cover. The cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install the new speaker.
rear door-remove the door panel. back speaker carefully pry off grille cover and replace speaker
If its a convertable, remove the the screws under the rear seat and remove. Then remove the screws holding the leather enclosures and remove from sill plate. remove the speaker boxes and replace. If you don't have new speaker boxes remove cover a speaker box, access speaker and replace, you will probably have to solder the wires, then reverse the order and put back together.
Remove the factory speaker cover on the inside of the door and remove the 3 screws from the mirror. The speaker cover is held in with 2 clips, one at the top and one at the bottom. They are friction fit clips.
Remove the speaker covers. Each speaker cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
from shop manual: remove luggage cover and holder assembly remove speaker cover retainer nut and and screws securing the cover in place over the speaker assembly loosen and remove the speaker retainer screws securing the speaker in place, lift the speaker out enough to access the wire harness at the rear of the assembly disconnect the speaker harness remove the speaker installation is the reverse of removal
You do not need to remove the door panel to change your speakers. Remove the speaker cover, by prying outward on the speaker cover retaining clips. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
on what car???
start by removing the mesh over the speaker carefuly so not to damage it, use a flat headed screw driver and gently pry it off. then remove the screws holding in the speaker. your good to go then.
There are Allen screws around the door panel. Sides and bottom. Remove those and the handle has a cover. separate the cover from the handle and remove screws. If there is a speaker in the door you need to find the little slots on the cover. Use a small screwdriver and pry the cover off.Remove the screws from the speaker. Pull out and up on the panel to remove. It has to go over the door lock and once it comes away unplug the light on the bottom of the door.
I had to replace the ones in my 1997 Sebring. Using a tool such as a flat head screwdriver detach the plastic cover that is over the door speaker. Remove the screws that are holding the speaker to the door. Pull the speaker out enough to detach the plastic clip that connects the wiring to the speaker. Installing the door speaker is the reverse of removing the speakers.
Remove the right pillar cover. Once removed slide a flat head screw driver carefully between the cover that holds the speaker and the dash cover. You will see 2 separate covers. Pry open slowly from the right side up. You will be able to use your hands. The speaker is held in with screws. I never took my out just unplugged it. Be careful with the windshield when you remove the speaker. Hope this helps How do you replace the front dash center speaker of a 2000 dodge intrepid es that has the factory infinity system?