0
I have a 2001 Hyundai Santa fe, they way I changed the tail lights was to open the hatch door, thus exposing the screws that hold the light lens assembly. these screws are two(2) hex type screws. Next with the screws off then you need to pull gently the lens assembly off. I had to use a flat needle nose plier to place it under the assembly to pry it off the car. Careful not to force it because the lens assembly also is held to the chasy of the car by a sort of a plastic pin that goes into a hole of the chasis. Just slowly place the needle nose pliers under the lens while pulling gently the lens in a straight line motion, you will feel it give way. placing the assembly back on is opposite of taking it off good luck
What else can I help you with?
How do you replace rear window brake light bulb on 2004 Hyundai Santa f e?
How do you replace rear window brake light bulb in the 2004 Hyundai Santa Fe?Read more: How_do_you_replace_rear_window_brake_light_bulb_on_2004_Hyundai_Santa_f_e
How do you replace rear window brake light bulb on 2004 Hyundai santa fe?
To replace the rear window brake light bulb on a 2004 Hyundai Santa Fe, first, open the rear hatch and locate the light assembly. Remove the screws or clips securing the light assembly cover, then carefully pull the assembly out. Twist the bulb socket counterclockwise to remove the old bulb, replace it with a new one, and reassemble the light assembly by reversing the steps. Finally, test the new bulb to ensure it’s functioning correctly.
Replace brake light Hyundai Santa Fe?
The brake light on a Hyundai Santa Fe is replaced by removing the retaining screws, twisting the bulb, and unscrewing it from the wiring harness. A new bulb is then installed and the assembly put back in place.
How do you change a side light in a Hyundai santa fe?
To change a side light in a Hyundai Santa Fe, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly, then carefully detach the connector from the old bulb. Remove the old bulb by twisting it counterclockwise, and insert the new bulb, making sure it’s secure. Finally, reconnect the connector and test the light to ensure it’s functioning properly.
How do i install a shift light in a Hyundai accent?
Remove the shifting console cover. Remove the shifting light retaining ring. Push the light bulb in and turn at the same time. The light bulb will come out. Reverse the process install the new light bulb.
How do you change rear brake light 2007 Hyundai Santa Fe?
To change the rear brake light on a 2007 Hyundai Santa Fe, first, open the rear hatch and locate the access panel on the interior side of the tail light assembly. Remove the panel by unscrewing the fasteners or pulling it off gently. Next, disconnect the electrical connector from the tail light assembly, then twist and remove the old bulb from its socket. Insert the new bulb, reconnect the electrical connector, and reattach the access panel to complete the process.
How do you replace a gear shift light in 2004 Hyundai Santa Fe?
To replace the gear shift light in a 2004 Hyundai Santa Fe, first, remove the center console cover by unscrewing any screws and gently prying it off. Locate the gear shift indicator bulb socket, twist it counterclockwise to remove it, and pull out the old bulb. Replace it with a new bulb, reinsert the socket, and reassemble the console by snapping it back into place and securing any screws. Finally, test the new bulb to ensure it's working properly.
Where is the air filter in a 2004 Hyundai Santa Fe?
lower tailgate unscrew two screws in the side remove tail light lens remove the 3157 bulb replace using dialectic grease on terminals reverse assembly.
How do you change the fog light bulb on a 2006 Hyundai sonata?
The dealer said that you have to remove the front bumper in order to even get at the bulb to change it!
How do you change the fog light bulb on a 2002 Hyundai Sonata?
You need to remove the headlight first. After removing the headlight, you will be able to unplug the power and remove the bulb from the housing. The new bulb comes ready to plug in.
How do you replace the bulb in high mount brake light for a 2006 Hyundai Sonata?
you need to remove the rear seat
How do you change the fog light bulb on a 2008 Hyundai sante fe?
To change the fog light bulb on a 2008 Hyundai Santa Fe, first, ensure the vehicle is turned off and the fog lights are cool. Access the fog light assembly by removing the screws or clips holding the cover in place, then disconnect the electrical connector. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble the components by reversing the steps. Finally, test the fog lights to ensure they are functioning correctly.
