answersLogoWhite

0

You start by removing the screw on the door latch on the inside of the door. Then you separate the top of the arm rest from the bottom by firmly pulling upwards with your thumbs, releasing the pins. Then pull the cardboard panel from the bottom of the door, movign upwards pulling firmly until the clips become loosened from the door frame.

Lastly, remove the window crank to remove the door panel. I have not figured out how to do this last little bit, so I am stuck (help).

Good luck!

To remove the window crank handle you will need to purchase a tool that is specifically made for this task. It is produced my GM and sells at your local parts store for about $12.00. The tool slides between the window crank and the interior panel and you turn to release.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you remove the driver side rear exterior door handle on a 1997 Geo prizm?

You gotta remove the door panel. You'll also have to remove the three screws that hold the door latch mechanism. That will allow you to access the two 10mm nuts that hold it on from inside the door.


How do you change the door speakers on a 94 Geo Prizm?

You have to remove the door panel. Then it's pretty much self-explanatory.


How do you remove inner door panel on 2006 Chevrolet Malibu?

what steps are required to remove the inside door panel on a 1997 Chevy Malibu.


How do you remove a passenger door panel on a 1997 Ford Ranger?

remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.


How do you remove the front door panels to get to the front speakers on a 2000 Chevy Prizm?

http://prodactor.blogspot.com/2005/09/removing-door-panel-from-toyota.html


How do you remove a door panel on a 1997 crown Victoria?

You can see the blueprint of the door on a 1997 Grand Marquis/Crown Victoria at the related link below. This will aid in the removal of the panel.


Can you remove the inside driver side door panel to replace the window on a 1997 Saturn SW2?

No. To remove the widow its easiest to remove the outside panel


How do you remove the door panel on a 1997 Oldsmobile 88 LS?

try a screwdriver


Is the 94 geo prizm door handle the same as the 93?

Geo Prizm door handles are the same 1993-1997


How do you tighten down a door mirror on a 1997 Chevy Corvette?

You will need to remove the door panel of your 1997 Chevrolet Corvette. When the door panel is removed the mirror retaining bolts will be visible. Tighten the mirror retaining bolts.


How do you remove the drivers side door panel off a 1997 Nissan Altima?

Carefully


How do you remove drivers interior door panel on a 1999 Chevy Prizm?

To remove the interior door panel on a 1999 Chevy Prizm, start by disconnecting the negative battery terminal for safety. Next, pry off the window crank handle if equipped, and remove any screws located behind it and in the armrest area. Carefully detach the panel by gently pulling it away from the door, starting at the bottom and working your way up, while ensuring you disconnect any electrical connectors for power windows or locks. Finally, lift the panel up to free it from the top edge.