hammer a screwdriver in to oil filter
In order to remove the oil filter from a 2007 Toyota RAV4 you need to use an oil filter wrench. This wrench is a specialty to Toyota.
A oil filter wrench.
No, any filter wrench will remove the filter.
No..maybe a oil filter wrench to remove it, but, install it by hand (HAND TIGHT)
Next to the oil pan. I recommend using an oil filter socket wrench attachment to remove the filter. A regular filter wrench will not fit and its difficult to loosen by hand.
Turn it counter clockwise with an oil filter wrench.
To remove a stubborn oil filter using an oil filter chain wrench, the best method is to securely attach the chain wrench to the filter, ensuring a tight grip. Then, apply steady and even pressure while turning the wrench counterclockwise to loosen and remove the filter. Be cautious not to apply excessive force to avoid damaging the filter or the surrounding components.
No. 2008 highlander has a aluminum filter housing you need to remove with a special type of filter wrench. I was able to tap mine loose without a wrench but it could be at 24n-m tight which is difficult to loosen.
The Oil Filter on this car is what is called a "clip-in" filter the way you remove it is to simply have the correct sized wrench, and remove the Cap and the filter should come with it.
The oil filter is located under the car just to the right of the oil pan. You should use an oil filter wrench to remove the filter.
Grab the filter with your hand or a filter wrench and turn counterclockwise.
You need a flat screwdriver to remove the belly pan. A 12mm hex socket/wrench to remove the oil plug. and an oil filter wrench to remove the oil filter if it is too tight.