To replace the torque converter clutch sensor on a 1994 Pontiac Sunbird, first disconnect the negative battery cable to ensure safety. Then, locate the sensor, which is typically found on the transmission; you may need to remove some components for better access. Unplug the connector, remove the mounting bolts, and replace the old sensor with a new one. Finally, reconnect the wiring, reassemble any removed parts, and reconnect the battery.
sounds like t.c.c solenoid.[torque converter clutch solenoid]
To replace the clutch in a 1993 Pontiac Sunbird 2.0L with a 5-speed manual transmission, first, disconnect the battery and remove the transmission by unbolting it from the engine and supporting it with a jack. Next, remove the old clutch assembly, including the pressure plate and disc, and clean the flywheel surface. Install the new clutch disc and pressure plate, ensuring proper alignment, then reattach the transmission and reconnect all components. Finally, bleed the hydraulic clutch system if necessary, and test the clutch operation before driving.
autozone.com current vehicle upper left choose car repair info vehicle repair guides hope u find it from there
It's an automatic, there is no clutch.
The labor to replace a clutch on a 1996 Pontiac Sunfire can range from $670 to $850, depending on where you go. This does not include the cost of the clutch itself, which is roughly $800.
Think of the torque converter as being the clutch between the engine and transmission.
Torque converter clutch? Remove transmission Replace Torque converter Reinstall
To change the TCC (Torque Converter Clutch) solenoid on a 1992 Pontiac Sunbird, first disconnect the negative battery cable to ensure safety. Then, locate the solenoid, which is typically found on the transmission; you may need to remove the transmission pan for access. Disconnect the electrical connector and unbolt the solenoid from its mounting position, then replace it with the new solenoid and reassemble everything, ensuring all connections are secure. Finally, reconnect the battery and check for proper operation.
It is attached to the valve body inside of the transmission.
Trouble code P0742 means:Torque converter clutch circuit stuck on
Buy a Manual. ;)
Buy a Manual. ;)