How to Install Front Brake Pads
Check related link below...
_______________________
Removing Front & Rear Rotors
I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT.
I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off...
The way I removed the Front & Rear Rotors was ...
1. I put lots of PB Blaster in the back and the front of the rotors to be removed.
2. I put plenty of tension with the 3 Jaw Puller...
3. I hit the back of the rotor with the sledge hammer while rotating rotor...
And it came right off...
Hope this helps...
how to replace rea pads on 2007 crew cab f150
Who cares
it would be best to replace all
Remove the calipers, then the caliper frame, rotor is now free.
To replace the rotors on a 1996 Ford F150 4X4, first, lift the vehicle and remove the front wheels. Then, remove the brake caliper by unbolting it and hang it securely to avoid strain on the brake line. Next, take off the caliper bracket and remove the old rotor by unscrewing any retaining screws, if present. Finally, install the new rotor, reattach the caliper and bracket, and ensure everything is torqued to specification before reinstalling the wheels.
The min thickness should be stamped on the backside of the rotor, pull and examine.
To replace the front rotors on a 1991 Ford F150 4x4, first, safely lift and support the vehicle, then remove the front wheels. Next, detach the brake caliper by removing the caliper bolts, and hang it securely to avoid straining the brake line. Remove the caliper bracket, then pull off the old rotor; if it's stuck, gently tap it with a hammer. Finally, install the new rotor, reassemble the caliper and bracket, and ensure everything is tightened to the manufacturer's specifications before reinstalling the wheels.
Rotors
The 2002 F-150 owners manual states the fuse panel is below and to the left of the steering wheel , by the brake pedal
Sepa la mow.....
4 nuts under the dash around the brake pedal
you remove plastic red/white cover with 2 screws and remove bulbs.