It's pretty simple to replace these truck struts. First, you find the right ones online. Make sure they say they will fit your year Concorde. Don't get the trunk struts for the Dodge Stratus or another car as they will not be long enough. Always replace them in pairs. They will cost about $30 for the pair.
Replacing them you only need a screwdriver and maybe a rubber mallet (I used the palm of my hand). You take the caps off with the screwdriver, and take the worn struts off and recycle them. To get them off you use the mallet or your hand. Hit straight and be careful.
Then, you snap the new ones on the same way. Be careful as the new ones will be very strong and your truck will pop up really fast. This could damage your truck, so use two hands to open it, and let it raise up gently.
There is an access panel in the trunk.
On the Concorde there is an access panel in the trunk. On all others, the fuel tank needs lowered.
It is bolted in place and does not fold down.
There is an access panel in the trunk.
1993-1997 Chrysler Concorde does have a fuel pump access plate under the carpet in the trunk.
Underneath the tire in the trunk
Weak trunk struts on a 2003 VW Jetta will not allow the lid to properly stay open. To replace the struts unbolt the mounts holding them to the car and replace them.
It is under the carpet in the trunk.
To replace the trunk struts on your Lexus SC300, first, ensure the trunk is supported to prevent it from falling. Use a flathead screwdriver to gently pry off the retaining clips on each end of the struts. Once the clips are removed, detach the old struts from the mounting points and replace them with the new struts, ensuring they are securely attached. Finally, reattach the retaining clips to complete the installation.
It is in the fuel tank. There is an access panel in the trunk.
No, the access panel is in the trunk.
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.