Theprocess of changing an axleis too involved to cover here. You will need to invest in a service manual, such as Haynes, that is available at your auto parts store or on eBay. After you study the procedure, if youfeel that it is a job that your tool and skill set will accommodate, have at it. If this is your first job more difficult than an oil change, you may want to consider taking it to an experienced mechanic, since the operation involves assemblies that, if not properly installed,will jeopardizeyour safety.
Ask the mechanic who is willing to do the job. No other answer has any meaning.
There is an axle for each wheel.
The answer is always the same. The only estimate that has any value whatsoever is from the person willing to perform the job. Start with your Subaru dealer. --Ken
To replace a CV boot on a 2002 Subaru Forester, first, lift the vehicle and remove the wheel. Then, detach the axle from the hub and slide it out of the transmission. Remove the old CV boot clamps, clean the joint, and apply new grease before fitting the new boot. Finally, secure the boot with new clamps, reassemble the axle, and reinstall the wheel.
Go to the auto parts store and get a manual for your Forester, like the Haynes. It has a full description of how to do the job. After reviewing the procedure, if you think that your skill level is up to the task, have at it. Otherwise, take it to a professional. --Ken
hou to replace rear struts
6000 miles
You can not replace transmissions due to the amount of room needed in the car
No, just replace it.
Subaru Forester was created in 1997.
Subaru Forester has a timing belt.
Replace the bulb, had to change one myselfe.