To replace the transmission oil in a Suzuki LT300E, first ensure the ATV is on a level surface and the engine is cool. Remove the drain plug located at the bottom of the transmission case to let the old oil drain completely. Once drained, replace the drain plug and fill the transmission with the recommended oil through the fill hole until it reaches the proper level. Finally, check for leaks and ensure everything is securely tightened before starting the engine.
To change the transmission oil on a 2005 Suzuki Forenza, start by warming up the engine slightly to thin the oil for easier drainage. Then, locate the transmission oil pan under the vehicle, remove the drain plug, and let the old oil drain completely. Replace the drain plug, refill the transmission with new oil through the dipstick or fill port, and check the level to ensure it's within the recommended range. Always dispose of the old oil properly and check for leaks after completing the procedure.
The transmission fill plug on a 2000 Suzuki Alto is behind the drain plug. Both the plugs are located underneath the transmission.
Remove the Suzuki 450 oil pan plug. Allow the oil to drain out of the oil pan. Replace the plug to the oil pan. Fill the motor with oil.
no
Trans. oil capacity - 0.5 litres
In a manual transmission, and in the differential.
hypo 80-90 gear oil
80w90 gear oil
i use 10w40 auto oil
Mobil 424 hydraulic transmission tractor oil or Amsoil tractor hydraulic transmission oil
The manual transmission uses SAE 80-90 weight gear oil.
GL-5 for gear oil and for engine oil use 10W-30