To replace the battery on a 2000 Porsche Boxster, first, ensure the vehicle is turned off and parked on a flat surface. Open the front trunk and locate the battery compartment under the cover. Disconnect the negative terminal first, followed by the positive terminal, and then remove the old battery. Install the new battery by connecting the positive terminal first, then the negative, and secure everything back in place before closing the trunk.
On my 2000 Boxster it just pulls off the lever.
The 2000 Boxter does not have a glove box.
http://www.theschillings.com/boxrelay.htm
there is usually a set of connections in the fuse box. My 911 has a little plug that pulls out and you connect a 12V back up battery to unlock the hood. Use a spare battery or a vehicle battery (with engine off).
There are several Porsches in the remake of Gone In 60 Seconds: 1988 Porsche 959, 1999 Porsche 996, 2000 Porsche Boxster, 1961 Porsche Speedster. In the original film the Porsche stolen from an auto dealership is a Porsche 911.
Porsche typically manufactures between 2000 and 3000 Boxster cars a year. In 2012, Porsche sold 2519 Boxsters, which increased from 1735 the previous year. Since 2005, annual Boxster sales had fallen every year due to high gasoline prices and poor economic conditions until recovering in 2012.
To replace a clutch at the Porsche dealer for a 2000 911 Carrera is 2960.60....at least that is what I paid in Nov. '07. Eek.
Carry a circus clown in the passenger seat and ask him to honk his horn as required
There are three fuses first on is in row D 8 and 9 and then row E 1
On a 2000 Porsche Boxster, the parking brake sensor is typically located on the parking brake mechanism itself, which is situated in the center console. It is connected to the lever assembly and activates a warning light on the dashboard when the parking brake is engaged. To access it, you may need to remove the center console trim. Always consult the vehicle's service manual for specific instructions and safety precautions.
To remove the rear bumper on a 2000 Porsche Boxster, first, ensure the vehicle is securely raised and supported. Then, remove the screws and bolts securing the bumper, which are typically found in the wheel wells and underneath the rear. Disconnect any electrical connectors for the tail lights and any other attached components. Finally, gently pull the bumper away from the car, taking care not to damage any clips or attachments.
The turn signal flasher relay on a 2000 Porsche Boxster S is typically located in the fuse box, which is situated in the front trunk (frunk) of the vehicle. To access it, you need to open the frunk and remove the cover of the fuse box. The flasher relay is usually found in a specific slot labeled in the fuse box diagram. If you're having trouble locating it, refer to the owner's manual for a detailed diagram.