0
The method may differ slightly from model year to model year, but it should be a fairly simple job. First off, you need to disconnect the negative (-/black) cable, then the positive (+/red) cable from the battery terminals and move them out of the way. Then, if there is a retainer bracket in place to hold the battery down, remove it. Now you should be able to lift the battery out. To install a battery, use the reverse process.
Note: for your safety: you should use gloves and eye protection. The cables should be (dis)connected in the order specified (disconnect negative first, reconnect negative last). You should also be careful not to let anything connect between the two battery terminals.
What else can I help you with?
How do you replace the cabin air filter on a dodge Dakota 2003?
A 2003 Dodge Dakota does not have a cabin filter.
Where is the battery on a 1998 Dodge Dakota?
Under hood
Where is the fuse box on a 2007 Dodge Dakota?
The fuse box on a 2007 Dodge Dakota is under the hood next to the battery.
How do you replace the AC evaporator on a 1994 Dodge Dakota?
What all is involved in replacing a a/c evaporator in a '94 Dodge Dakota?
How do you replace a transmission solenoid on a 2001 Dodge Dakota 4 7 engine 4X4?
How do you replace a transmission solenoid on a 2001 dodge Dakota 4.7 engine 4x4 location?
Do you have to disconnect the battery to change a rear wheel sensor on a 1999 dodge Dakota?
No.
Where is the purge solenoid on 2002 dodge Dakota?
To the right of the battery, when looking at engine.
How do you replace fuel pump 1992 Dodge Dakota?
To replace the fuel pump on a 1992 Dodge Dakota, first, relieve the fuel system pressure by removing the fuel pump relay and starting the engine until it stalls. Next, disconnect the battery and drain the fuel tank. Remove the tank from the vehicle by unbolting it and disconnecting the fuel lines and electrical connections. Finally, replace the old fuel pump with a new one, reassemble the tank, and reconnect the battery and fuel relay.
How do you replace a wiper linkage bushing of a 1994 dodge Dakota?
To replace the wiper linkage bushing on a 1994 Dodge Dakota, first, disconnect the negative battery cable to ensure safety. Remove the wiper arms by unscrewing the retaining nuts and gently pulling them off the shafts. Next, remove the screws or bolts securing the wiper linkage assembly, and detach it from the vehicle. Replace the worn bushing with a new one, reassemble the linkage, reattach the wiper arms, and reconnect the battery.
How much does it cost to replace a serpentine belt on a dodge Dakota?
It typically costs between $100 and $150 to replace the serpentine belt on a Dodge Dakota. The belt costs around $30 with the rest being labor.
What makes a 1999 Dodge Dakota sputter?
There are a few things that can cause a 1999 Dodge Dakota to sputter. For example, the battery may be malfunctioning or the park plugs can be going bad.
What is the number 1 cylinder on a 1992 Dodge Dakota 3.9?
it is the cylinder closest to the battery.
