first disconnect battery then you will need to locate the low pressure side hose and connect an a/c recovery machine to extract freon then remove bad hose and replace with new one and also replace orifis tube or what ever it has also all o-rings and any other seals you can put it all back together pull a vacuum let that sit for at least 30 min make sure to check gauge pressures witch should stay the same as long as there are no leaks start putting freon back in after first can start car turn a/c on fill to capacity check inside temp and stay cool
how to replace ac hose assembly on 2005 jeep liberty
theres a great website called shbox.com that has the routing diagram for the ac hose.
To replace the AC hose on a 2002 Ford Escape, first, ensure the vehicle is off and the AC system is fully discharged. Remove any necessary components for access, such as the engine cover or air intake duct. Disconnect the old hose by loosening the fittings using the appropriate tools, then install the new hose by securing it tightly to the fittings. Finally, recharge the AC system with refrigerant and check for leaks.
The name of the AC hose for a BMW 323i is the AC vacuum hose. The hose can also be called the AC pump pressure hose.
The best way to extend or replace a portable AC exhaust hose for optimal performance is to use a hose that is the same diameter and length as the original hose. Make sure the hose is properly sealed to prevent air leaks, and avoid using duct tape as it can cause overheating. Additionally, keep the hose as straight and short as possible to maintain efficient airflow.
You have to remove the air conditioning compressor bolts set the unit aside but do not remove the freeon hose. Then remove the mounting bracket and then you can get to the bypass hose to replace it. Replace mounting bracket and compressor and job is complete
Check to see if the ac unit is spinning while the car is on and the ac is turned on. If it is not, you may have to replace your computer under the fan fliter. If it is, go out and get some ac dye to see if there is a leak in your ac hose
There was a recall on the AC seals, you may be able to get a little help from a dealership, but it also may have been too long since the recall. The recall was in 2001. Otherwise, you'll need to evacuate the AC system, remove the hose and replace the O-Ring seals, then recharge the AC. It's a relatively simple process if you have the tools.
Remove the bottom hose from the evaporater at the firewall, pull out the expansion valve, i highly recommend flushing out the system to remove excess sludge. Replace the valve and the hose.
You will need to remove the ac compressor, alternator, and the bracket underneath them to access the bypass hose.You will need to remove the ac compressor, alternator, and the bracket underneath them to access the bypass hose.
You need to remove the ac compressor, alternator, and their mounting bracket.
A portable AC hose kit typically includes a hose, window adapter, and connectors for easy installation and ventilation of the air conditioner.