To replace the ignition switch on a 2000 Dodge Stratus, first disconnect the battery to prevent electrical shorts. Remove the steering column cover by unscrewing the screws, then locate the ignition switch mounted on the steering column. Disconnect the wiring harness and unscrew the switch from its bracket, then install the new switch in reverse order, reconnect the wiring harness, and reassemble the steering column cover. Finally, reconnect the battery and test the new ignition switch.
A Dodge Stratus does not have a reset switch.
my brother has a 2001 stratus and had problems with the ingnition switch turning forward. we hired a lock smith to repair it at a fraction of the cost.
To replace the ignition wire set on a 1998 Dodge Stratus ES 2.5L, you must first disconnect the wires under the instrument panel. You would then hook it up in the exact same order.
I had a 96 Stratus that would do that, and it turned out to be that the starter was bad.
You will need to remove the retaining ring at the top of your 1995 Dodge Grand Caravan ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
Where is the cool fan relay on a dodge stratus and how do you replace it
http://wiki.answers.com/Q/What_part_do_you_need_your_2005_dodge_stratus_was_broken_into_and_ignition_switch_was_broken_out_of_the_steering_wheel_the_part_that_hole_the_switch_in_was_damage"
There is none as your Dodge is not equipped with an inertia switch.
Bad ignition switch or wrong key.Just replace with new switch about $10.00 NAPA
How much should it cost to replace the airbags on a 1997 dodge stratus?
A Dodge Stratus does not have an inertia or reset switch. The fuel pump is computer controlled with relays.
No. A 1995 Dodge does not have a reset switch.