answersLogoWhite

0

Do you mean rotor? If so, remove the distributor cap and remove the old rotor and install the new one. Simple repair.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Do you have to replace rotors each time you do a brake job?

first measure the brake rotor then inspect the rotor surface inspect the brake pad surface if either is rough or irregular then replace the rotor you will have better brake performance and brake pad -rotor life thank you


What could be the problem if a buick park avenue steering shakes while braking?

Warped brake rotor. Have the rotors removed and trued or replaced. Replace the brake pads at the same time.


Why do brakes pulsate in 97 buick lesabre?

You have warped the brake rotors. Driving fast & hard stopping or riding the brake will cause this when the rotor is hot and you are stopped with heavy pressure on the brake pedal. Replace rotors and pads.


Can you replace just one rotor?

Can I reuse a resurfaced brake rotor with a new rotor on a car


Front right rotor is grinding on disc brake mount on 2002 ford escape?

Replace rotor / cut rotor & replace brakes.


When do you need to replace brake rotor?

when needing brakes do you have to replace the rotors to on a s60r


How do you change brake pads on a Buick Reatta?

To change the brake pads on a Buick Reatta, first, ensure the vehicle is securely lifted and supported. Remove the wheel to access the brake caliper, then unbolt the caliper and slide it off the rotor. Take out the old brake pads and replace them with new ones, ensuring they are properly seated. Finally, reattach the caliper, replace the wheel, and lower the vehicle before testing the brakes.


Specifications 1998 Buick Park Ave rear brake rotor?

Specs 98 Buick Park Ave rear pads


Will it cost over $400 to have my brake rotor repaired ?

Yes, your brake rotor can be really expensive to replace. However, I do not think it will cost that much.


How do you remove the brake rotors on a 1993 Buick Century?

Remove the tire, brake caliber and the rotor should side off the hub.


How do you get the rotors off of a 1992 Buick roadmaster to get to the studs so you can replace them?

remove wheel. remove brake caliper. remove center "dustcap" from rotor. remove cotter pin. remove nut lock. remove adjuster nut. remove rotor. the rotor has the studs pressed into it so you now have 2 options. 1: press in new stud(s) 2: replace entire rotor.


How do you replace rear rotor and pads on a 1998 Bravada?

You will need to remove the tire and wheel of your 1998 Oldsmobile. Remove the brake pad assembly. Tap on the brake rotor with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new rotor and pads.