To replace a 3-speed fan switch, first turn off the power to the fan. Remove the fan cover and locate the switch. Unscrew the switch from the fan housing and disconnect the wires. Install the new switch by connecting the wires and screwing it back into place. Test the fan to ensure the new switch is working properly.
Change blower fan control switch in the dash
To replace a 3-speed ceiling fan switch, first turn off the power to the fan. Remove the fan housing and locate the switch. Unscrew the switch and disconnect the wires. Install the new switch by connecting the wires and screwing it in place. Reassemble the fan housing and turn the power back on to test the new switch.
To replace a ceiling fan pull chain switch for a 3-speed fan, follow these steps: Turn off the power to the fan at the circuit breaker. Remove the fan's light kit or housing to access the switch. Disconnect the wires from the old switch. Remove the old switch and replace it with a new one. Connect the wires to the new switch according to the wiring diagram. Reassemble the fan and turn the power back on to test the new switch.
Why are you replacing the switch? If the fan works only on high speed, replace the fan resistor. There was a TSB for this.
Replace fan switch.
It is the resistor, replace it.
propably need to replace the blower control switch/resistor
"How do you replace the fan control switch on a 2002 Grand Prix?"
The speed switch for a ceiling fan controls the rotation speed of the fan blades, allowing you to adjust the airflow and cooling effect in a room.
with a variable speed switch
You can replace it with a new one. However, it could also be the relay. I purchased them at Advance auto parts.