To replace the flasher on a 1998 Mercury Sable wagon, first locate the flasher relay, which is typically found under the dashboard near the steering column or in the fuse box. Remove the old flasher by pulling it straight out from its socket. Insert the new flasher into the socket, ensuring it fits securely. Finally, test the turn signals and hazard lights to confirm proper operation.
1999 mercury sable horn replacement
It is in the far back on the passenger side by the door.
All 1998 Mercury Sable vehicles have a ( 16.0 U.S. gallon fuel tank ) * according to the owners manual *
A 1998 Mercury Sable ( all vehicles ) have a ( 16.0 U.S. gallon fuel tank ) according to the owner manual
Replace auto lamp module.
Replace it with new tubing.
To replace the turn signal flasher in a 1998 Hyundai Accent, locate the flasher on the driver's side just above the brake pedal mount. The flasher is a plug-in device with three prongs. Unplug the old plug and plug in the new plug.
To replace the flasher relay on a 1998 Nissan Pathfinder 4WD, unplug the old turn signal flasher and plug in the new one. It is a three prong plug located under the dash on the driver's side. The hazard flasher relay works the same way.
The window washer pump should be located in the bottom of the washer reservoir for the 1998 Sable. The reservoir may have to be removed to replace it.
You have to diagnose the system to determine the cause. Check the fuses, the bulbs, the flasher relay then the switch.
Replace the turn signal flasher relay.
Cost $700 in labor to replace the flasher as the dealer could not locate it. Supposedly the entire dash had to be removed on my 1997 Park Ave..