0
This is not a particularly difficult job but you do need a special tool for the brake caliper pistons..
You need to obviously remove the rear road wheels- then looking at the caliper you will see 2 x 13mm bolts - remove those and the caliper top comes of revealing the pads..
Remove the pads..
Then you need to connect / use the special tool to get the piston to go back into the caliper to allow the fitting of the new / thicker pads..
Do not try levering / forcing the pistons in - you will damage the caliper.. The pistons need pressure but they have to screw in , they have a thread mechanism inside that will be irreparably damaged if forced..
You can buy the tool needed at local car / tool shops - That is an example- when buying , ensure the seller knows the make / model of your car.
Once the pistons are in enough to allow the new pads to fit in - place the pads in the fitting - replace the caliper top and fit the bolts you just removed. Sometimes new bolts come with the new pads, if you have them, fit them. Re fit the road wheels and thats it..job done.
What else can I help you with?
Do I need a special tool to replace rear brake pads on a peugeot 407 2cc hdi 2006?
nope
How do you replace the emergency brake pads on a 1999 Lexus ES 300?
the emergency brake pads ARE the REAR brake pads.
Replace rear brake pads on Mercedes clk?
How much does it cost to replace brake pads on a 1999 Mercedes Clk?
How much is the labour to replace rear brake pads on a Mercury Mountaineer?
In CT USA, a garage would charge 1 hour labor to replace the rear brake pads on that Mountaineer.
How do you replace rear brake pads on a 1998 Nissan Maxima?
take it to a brake specialist
How do you replace rear brakes on a 2001 Kia sportage?
Remove the rear tire and wheel. Remove the brake spring from the brake assembly. Remove the brake pads. Reverse the process to install the new brake pads.
How to replace the rear brake pads on a car?
To replace the rear brake pads on a car, first, lift the car and remove the wheel. Locate the brake caliper and remove the bolts holding it in place. Take out the old brake pads and replace them with new ones. Reassemble the caliper and wheel, then lower the car. Test the brakes to ensure they are working properly.
How do you replace rear brake pads on jaguar x type d?
Just remove the old brake pads and insert the new ones.
How do you replace the rear brake pads on a 2001 Mazda 626?
Lift the car on a vehicle jack, remove the tire, remove the brake shoe/caliper and remove the old brake pads. Put in the new brake pads, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
How do you replace brake pads on 1988 lincoln mark vii?
Front or rear?
Replace rear brake pads 2006 volkswagen jetta?
Go to the Dealer!!!
How much does it cost to replace ford focus rear brake pads?
What is a continent
