0
== == == ==
Loosen wheel lug nuts, jack up and support vehicle, finish removing wheel. Using a 13mm wrench, loosen the two caliper to pin bolts on the back of the caliper. This will release the caliper. Using a screwdriver, pry the caliper up and away from the bracket, the caliper should slide off the brake pads and be free from the bracket.
Wire the caliper up and out of the way.
Remove the pads.
Using the special Ford tool, place it on the caliper piston and turn the caliper piston back into the bore with a rachet and extention until it is seated all the way (turn clockwise). The ford tool fits into the notches on the caliper piston.
Slide new pads into the caliper bracket, slide the caliper over the new pads and rotor, reattach the 13mm bolts and torque to 25lb/ft.
If removing/replacing the rotor, remove the caliper and pads as outlined above, then continue by removing the caliper support bracket using a 15mm wrench on the two bolts holding it to the hub assembly. Remove the caliper bracket, then the rotor should come off. It may require a few taps with a rubber mallet to loosen.
When reinstalling the caliper support bracket, torque the 15mm bolts to approx. 90 lb/ft.
When reinstalling the wheel, torque lug nuts to approx 95 lb/ft
What else can I help you with?
How do you replace the brake light switch in a cravan 2000?
my back brakes lights won't work but the one in the back window does
How to replace rear brakes on Isuzu rodeo 2000?
To replace the rear brakes on a 2000 Isuzu Rodeo, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the rear wheels and the brake drum or caliper, depending on whether the vehicle has drum or disc brakes. Replace the brake shoes or pads, making sure to adjust any necessary components like the parking brake. Finally, reassemble everything, check for proper function, and test drive the vehicle to ensure the brakes are working correctly.
How to replace brakes and rotors on a 2000 Suzuki Esteem Wagon both Front and Back?
To replace the brakes and rotors on a 2000 Suzuki Esteem Wagon, start by safely lifting the vehicle and removing the wheels. For each brake assembly, remove the caliper bolts, detach the caliper, and then slide off the old rotor. Install the new rotor, reattach the caliper, and replace the brake pads. Finally, repeat the process for the rear brakes, ensuring to pump the brake pedal before driving to ensure proper brake function.
How do you replace the rear brakes on a 2000 alero?
To replace the rear brakes on a 2000 Alero, start by lifting the vehicle and removing the rear wheels. Next, remove the brake caliper by unbolting it and sliding it off the rotor; support it to avoid stress on the brake line. Replace the brake pads and, if necessary, the rotors, then reassemble the caliper. Finally, repeat the process on the other side, reattach the wheels, and pump the brake pedal to ensure proper engagement before driving.
You have a 2000 Malibu and it is making a clicking sound when you apply the brakes what is it?
It's the brake calipers. Probably around $400 to replace in a shop.
How do you replace the front and rear breaks on a 2000 gmc safari?
To replace the front and rear brakes on a 2000 GMC Safari, start by safely lifting the vehicle and removing the wheels. For the front brakes, remove the caliper bolts, slide off the caliper, and replace the brake pads, ensuring to compress the caliper piston if needed. For the rear brakes, remove the drum or caliper, replace the brake pads or shoes, and adjust as necessary. Finally, reassemble everything, ensuring all components are tightened to specification, and pump the brake pedal before driving to ensure proper function.
How do you fix a leak going to the back brakes on a 2000 dodge ram 1500?
Replace brake lines or wheel cylinder which ever is leaking
How do you Replace the Brakes on a 2000 BMW Z3?
To replace the brakes on a 2000 BMW Z3, start by lifting the car and removing the wheels. Then, remove the caliper bolts to take off the caliper and hang it securely without stressing the brake line. Replace the old brake pads with new ones, ensuring they are properly seated, and compress the caliper piston if necessary. Finally, reattach the caliper, replace the wheel, and repeat the process for the other side before lowering the car and testing the brakes.
How do you replace the brake line on a grand am?
How do i replace brake lines on a 2000 grand am
How do you adjust brakes on a 2000 suzuki vitara?
To adjust the brakes on a 2000 Suzuki Vitara, start by lifting the vehicle and removing the wheel to access the brake assembly. For drum brakes, locate the adjusting wheel through the access hole and turn it to expand or retract the brake shoes until they lightly contact the drum. For disc brakes, check the caliper's adjustment and ensure the brake pads are properly seated; replace them if worn. Finally, pump the brake pedal a few times to ensure proper function before reassembling the wheel.
Where is the brake fuse located at on a 2000 ford mustang?
In a 2000 Ford Mustang, the brake fuse is located in the fuse box, which is typically found under the dashboard on the driver's side. To access it, you'll need to remove the cover of the fuse box. The specific fuse for the brake lights is usually labeled in the diagram on the cover or in the owner's manual, often identified as "Stop" or "Brake." Be sure to check the correct amperage and replace it if necessary.
How do you change the rear brakes on 2000 Toyota Camry LE?
Lift the car with a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
