0
Remove wheel; remember to block up front wheels as you need to take hand brake off. Remove wheel, undo 2 x 19mm bolts from rear of calipers and remove caliper off the disc, remove old pads, compress piston. The rear brakes have a slotted piston that needs to be turned clockwise to retract nd push piston rearward back into caliper. There is a special tool available at local autoparts store or you can try needle nose pliers. Replace pads and put caliper back on disc asnd bolt up.
What else can I help you with?
How to replace clutch slave cylinder 1991 Nissan Maxima?
I am paying $195 parts and labor in my 98 maxima
What is the firinG order for 1991 Nissan Maxima?
1991 Nissan Maxima 3.0 liter SOHC V-6 (VG30E)
Can i you use a 1999 compressor on a 1991 Nissan maxima?
no
Can a 1991 Nissan Maxima use a 1994 Nissan Maxima engine?
yes as long as they are both sohc or both are dohc engines
Is a 1989 Nissan Maxima transmission the same as a 1991?
they are the same
How do you remove and replace the struts on a 1991 Nissan Maxima SE?
BIG JOB and you need to have the front end aligned before you drive it. TAke it to a garage.
Why the tail lights will not turn off on a 1991 Nissan Maxima?
You may have to replace the headlight switch since your tail lights are tied into the same switch.
Which other year's transmission will fit a 1993 Nissan Maxima 3.0 sohc?
The 1993 Nissan Maxima transmission is interchangeable with any 1991 through 1995 Nissan Maxima models. The transmission mounts might be slightly different.
Does a 1991 Maxima have a timing belt?
Yes , the 3.0 liter V6 engine in a 1991 Nissan Maxima has a timing BELT ( P.S. - it is also an interference engine )
What is the lug bolt pattern for a 1991 Nissan maxima?
5 bolt i think
How do you replace the bottom radiator support on a 1991 Nissan Maxima?
To replace the bottom radiator support on a 1991 Nissan Maxima, start by disconnecting the battery and removing any components obstructing access, such as the radiator and front bumper. Next, unbolt the old radiator support from the chassis and carefully remove it. Install the new support by aligning it with the mounting points and securing it with bolts. Finally, reassemble the components you removed and reconnect the battery.
Where is the fule pump located in a 1991 Nissan maxima?
the fuel pump is in the gas tank
