3 bolts 2 wires
5 1/4 per crutchfield.com =============================== My Diamante had factory 6.5"
To replace the alternator on a 2003 Mitsubishi Outlander, first disconnect the negative battery cable. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mount and disconnect the electrical connectors. Install the new alternator by reversing the removal steps, ensuring all bolts are tightened and the electrical connections are secure. Finally, reattach the serpentine belt and reconnect the battery cable.
Remove the wiring harness from the back of your 2003 Mitsubishi Eclipse alternator. Loosen the alternator tensioner bolt. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
How do you replace the timing belt on a 2003 Mitsubishi Lancer?
To replace the water pump on a 2003 Mitsubishi Diamante, first, disconnect the negative battery terminal and drain the coolant. Remove the serpentine belt and any components obstructing access to the water pump, such as the timing cover. Once accessible, unbolt the old water pump, clean the gasket surface, and install the new pump with a new gasket. Finally, reassemble everything, refill the coolant, and reconnect the battery.
about $700 to $800...with a new water pump
boi bangs
steps to replace alternator on 2003 ford d150
The dealer service manual says 60,000 miles. But, on the Diamante forum there are cars with 180,000 miles on the original belt. Sounds scary! This is a "interference" engine. This means that if the belt breaks, the valves hit the pistons and cost a lot!!!
the oil filter is next to the oil pan underneath the car( passenger-side)
How to replace alternator on a 2003, Ford F-350, 6.0 ltr.
need to replace alternator on a ford expediting 2003