0
What else can I help you with?
How do you replace a BMW E36 alternator belt?
Release the tension using a wrench etc from the idler pulley.
How do you replace alternator belt on a 1982 Buick Regal?
Disconnect the 1982 Regal alternator. Loosen the alternator bolts and slide to release belt tension. Put new belt on ( you may have to remove other belts to gain access) and pull the alternator sideways to put medium tension on the belt while tightening the bolts. Reconnect the battery.
How do you replace alternator belt on 1990 Mitsubishi mirage?
To replace the alternator belt on a 1990 Mitsubishi Mirage, first, disconnect the battery to ensure safety. Loosen the tensioner bolt and the alternator mounting bolts to release tension on the old belt. Remove the old belt and install the new one, ensuring it's properly seated on the pulleys. Finally, adjust the tension by repositioning the alternator, tighten the bolts, and reconnect the battery.
How do you release tension on the power steering belt in order to change it on a 1994 Mazda Protege?
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
How do you replace belts on a 1995 altima?
You must first loosen the alternator, do not remove it. remove the alternator tension screws top and loosen the bottom screws DO NOT REMOVE push the alternator toward engine, for the a/c belt you must loosen the belt tension pulley and move it. replace in reverse order
How do you release the tension on the serpentine belt on a 1997 Firebird Formula 5.7?
By loosening the tension on the alternator nut
How do you adjust the belt tension for a 98 Accord to replace the alternator?
Apply a wrench to the center bolt on the pully and turn it will adjust the tension.
Tighten the alternator belt on a 1993 eagle summit?
"First Remove the Tension bolt from the alternator and remove." "Next take a hammer and gently tap the alternator down" "Do the same with the Tension Mount" "After realigning the alternator and the Tension mount replace the bolt" "BE CAREFUL NOT TOO TIGHT ON THE BELT OR YOU WILL RUIN THE BEARINGS" "GOOD LUCK"
How do you tighten alternator belt on a 93 Plymouth acclaim?
The 93 Acclaim has a serpentine belt. The tensioner below the alternator is what keeps the tension. If you have not tension I would replace the belt first and then check the tensioner.
How do you replace the alternator on a 95 grand am gt?
loosen the tension on the belt with the tension pulley, remove the belt then disconnect your wires from the alternator then take the 3-4 bolts, holding the alternator on, off. then do the opposite to put the new one back on
How do you replace the alternator on a 1998 Ford Contour 4 cylinder?
loosen the serpretine belt tension and remove the two bolt that hold the alternator
How do you replace an alternator in a 2003 rendevous?
Disconnect the NEGATIVE battery cable at battery.Then you will have to release the tension on the serpentine belt there is a belt tensioner that requires a 22mm wrench to release the belt.Then disconnect wire HARNESS CONNECTOR on back of alternator & remove mounting bolts.Assemble in reverse order.
