To replace the battery in most years of Chevrolet Celebrity:
Use a 15 mm wrench to remove the two bolts in the brace just above the battery and move the brace out of the way.
The ignition switch should be off as well as all lights etc.
Use gloves to protect your self from the acid in the battery.
Remove the battery hold down at the front base of the battery.
Remove the ground wire from the battery being very careful not to short the wrench out on the positive cable. You may have to reposition the battery to get to the ground wire terminal.
Remove the positive cable and lift the old battery clear of the car.
Reverse the removal process to install the replacement battery. The ground wire should be attached after the positive cable has been replaced. Be careful not to short out the positive cable with your wrench.
How to replace the power steering depends on which component you wish to replace. Let us know what it is and we will get back to you.
The crankshaft position sensor on a 1987 Chevrolet Celebrity is on the side of the engine nearest the firewall. I need to know which engine to give a more specific answer.
The horn is located in the engine compartment.
The water pump is on the front of the engine.
The firing order for a 1987 Chevy Celebrity with the 2.5L 4 cylinder engine is: 1 3 4 2
p185-75-14 are the size
Here is a fact sheet on the Chevy celebrity http://auto.howstuffworks.com/Chevrolet-celebrity.htm/printable I found this really interesting
123579
It on the back of the coil packs going into the side of the block.
Put the proper key in the lock cylinder and unlock the door.
replace it
To replace the timing belt tensioner on a 1987 to 1990 Chevrolet Celebrity V6: 1. Use a 3/8" breaker bar to release the belt tension, move the belt out of the way. 2. Remove the single bolt out of the center of the fixed end of the tensioner. The belt tensioner will now come off. 3. Install the replacement tensioner and put the belt back on.