To replace the belt on an MTD 13AN771G729, first, disconnect the spark plug for safety. Remove the deck by unscrewing the necessary bolts and detaching the belt from the engine pulley. Install the new belt by routing it around the appropriate pulleys, ensuring it is properly seated in the grooves. Finally, reattach the deck, reconnect the spark plug, and test to ensure proper operation.
Need. Picture of belt setup
I gave this answer = (How do you replace the belt on a MTD 13A0772G055 v belt?( = which is the answer to the below answer. I want the routing diagram if possible. Mtd is the worlds largest builder of lawn & garden equipment, they make many different types and designs, please post the actual model number and I will tell you step by step. This number is located underneath the seat will look something like 13as675h372, something similar. Post it and I will tell you exactly. 13bt604h452
Go to the MTD Manual Archive with the number you have and enter it into the Model Number box. For the Serial Number simply type a 1. Link is below.
Remove battery, take out battery tray then remove nut on top of pulley take pulley off slide the new belt on then replace the nut
To replace the drive belt on an MTD 13A7660G752, first, disconnect the spark plug for safety. Remove the mower deck by unscrewing the necessary bolts and detaching any drive linkage. Next, take off the old belt by sliding it off the pulleys, then install the new belt by routing it according to the belt diagram usually found on the mower. Finally, reassemble the mower deck, reconnect the spark plug, and test the mower.
Go to the mtd website, you will find them there.
To replace the small drive belt on an MTD Yard Machine model 14BJ845H062, first, disconnect the spark plug to ensure safety. Remove the mower deck by unscrewing any bolts or pins holding it in place. Then, locate the drive belt, detach it from the pulleys, and replace it with the new belt, ensuring it’s properly seated in the grooves. Finally, reassemble the mower deck and reconnect the spark plug before testing the machine.
To replace the belt on an MTD model 13AH661F352, first, ensure the mower is turned off and disconnect the spark plug for safety. Remove the deck by detaching any retaining clips or bolts, then take off the old belt by sliding it off the pulleys. Install the new belt by threading it through the appropriate pulleys, making sure it follows the correct routing path. Finally, reattach the deck and reconnect the spark plug before testing the mower.
The MTD 754-0498 drive belt typically measures 42 inches in length. This belt is designed for various MTD lawn equipment models, ensuring proper functionality and drive performance. Always verify compatibility with your specific model before purchasing.
go to mtd .com enter model number an follow instrutions
To replace the deck belt on an MTD Yardman 38-inch cut mower, first, disconnect the spark plug for safety. Then, remove the deck by unfastening the retaining bolts and lifting it off. Next, take off the old belt by removing any necessary covers and pulleys, then thread the new belt through the appropriate path around the pulleys. Finally, reassemble the deck and reconnect the spark plug before testing the mower.
you were no help