According to the owner's manual for 2009 on pages 464-65:
(1) open the liftgate
(2) remove the two fasteners from the inboard side of the taillight housing.
(3) insert a trim stick between body panel and outboard side of the taillight housing with one hand and grasp the flange on the inboard side of the taillight housing with the other. use the trim stick and hand pressure together to disengage the taillight housing from the vehicle.
(4) rotate the bulb's electrical connector 1/4 turn counterclockwise (lefty loosey) and remove it from taillight housing.
(5) remove the bulb from the connector socket and install replacement bulb.
(6) install the bulb and connector assembly into the taillight housing and rotate the connector 1/4 clockwise to lock it in place
(7) reinstall the taillight housing and fasteners.
To replace the brake light on a 2001 Dodge Durango the light lens must be removed. It is held on by a clip on one side and a hinge on another. It opens like a door to access the brake light housing.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
The brake light switch is on a bracket near the base of the steering column.
REPLACE THE BULB
To remove the brake light on a 2010 Dodge Journey, first, open the rear hatch and locate the access panel on the inside of the tail light assembly. Remove the screws or clips holding the panel in place, then carefully pull it away to expose the tail light assembly. Disconnect the electrical connector and unscrew the tail light assembly from the vehicle. Finally, you can replace the bulb by twisting it counterclockwise in the socket, then reassemble everything in reverse order.
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.
tail lights circuit
Where is the brake light fuse found on a 1996 dodge grandcaravan
replace the headlight switch its wore out replace the headlight switch its wore out
Hey Laura==The whole tail light housing has to come off and the bulbs just come out from the rear. GoodluckJoe
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.