0
Assuming the 94 model is the same as the 98, and if you already know where it is (over the steering column under the dash), you know it is difficult to get to. There may be an easier way,but my experience taught me this solution. To get the clip off,try to spin it around until you see a vertical slot in the top portion of it. Take a thin regular flat screwdriver and open that slot as much as you need to, then get some long, crooked, needle-nose pliers and maneuver it off. Lift on the other end of the switch to unsnap it from the brake rod and slide it off. all of this is assuming that you cannot get your hand up in there to work with it. To put the replacement part on, just slide it on, snap it down, and put your clip back on (if you didn't have to destroy it to get it off, but if you did, go to a dealer and get another for a couple of dollars). Putting it back on may turnout to be a bigger problem than taking it off, but it is doable, be patient. I had to get a small pair of crooked needle-nose pliers and go in from the bottom against the floorboard and get the clip on and then take a long screwdriver and finish pressing it on. I felt so proud to final get it on (two days), that I am considering finding me a shade tree and go into business.
What else can I help you with?
How do you replace a brake light switch on 95 GMC Sierra 1500?
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.
How do you install a brake light switch in a 1994 GMC Sierra?
check with the dealership there was a recall to replace the switch for free! I had mine replaced...tombo
How do you replace the Brake Light Switch in a 2000 ZX2?
how to replace the brake light switch at the pedal of a 2001 ford zx2
How do you reset the brake light switch on a 92 Chevy Corsica?
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
How do you replace a brake light switch on a dodge neon?
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
How do you replace brake light switch on a Chevy Tahoe?
How do you replace a break light switch on 1995 Chevy Tahoe
How do you replace the stop light switch in a 1998 chrysler Concorde?
brake light switch is mounted by the brake pedel remove lower panel above brake pedel and then you will see the switch should be able to turn the switch to replace
How do you replace brake light switch in Chevy Monte Carlo?
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
How do you replace the brake switch on a 1990 Maxima?
look on the brake pedal you will see a lil switch there that's the brake light switch
How do you replace brake light switch on a 1997 GMC Sierra pickup?
Im in the same boat as you are but i think you have to disable the airbag and drop the steering wheel to reach it
How do you replace a brake light switch on a 1999 Chevy Malibu?
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
The brake warning light wont go off on your 1990 Toyota 4runner?
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.
