it is fuel injected no carb to replace it simply take off the air flow sensor it should be 4 10 mm bolts it just pops off throttle housing its an easy fix
A Mercedes 190e doesn't have a carburetor. They are fuel injected.
== ==
how long does it take to replace a carburetor on a chevy truck?
If it had a carburetor , it wouldn't be hard to replace - it's fuel injected
my 1993 190E 2.3 is doing the same thing. just replace the switches...they tend to not last
There is no reason you would have to.
By using a tool box open the location and remove it to replace it with a new one
It would be very expensive considering that car doesn't have a carburetor.
Remove the hoses and clips , replace the hoses and clips!
it is hard trust me.
To replace the carburetor jet on a Toyota 5K engine, first, remove the carburetor from the engine by disconnecting the throttle linkage and fuel line. Once removed, disassemble the carburetor to access the jet, which is typically secured with a small screw or threaded in place. Carefully unscrew or pull out the old jet and replace it with the new one, ensuring it’s seated properly. Reassemble the carburetor and reinstall it on the engine, reconnecting all components as they were.
To clean the carburetor on the 1979 Suzuki GS550, it is a good idea to empty the carburetor and remove all fuel lines. Then, replace the float and valve in the carburetor and clean the bowl. Fill the carburetor with fuel and flush several times.Ê