0
What else can I help you with?
How do you change CV joint on 1991 Geo Prism?
To change the CV joint on a 1991 Geo Prism, first, safely lift the vehicle and remove the wheel. Then, detach the axle nut and any components obstructing the axle, such as the brake caliper and rotor. Carefully pull the axle out of the transmission and separate the CV joint from the axle shaft. Replace the CV joint with a new one, reassemble the parts in reverse order, and ensure everything is securely fastened before lowering the vehicle.
How do you replace the CV joint in a 1997 Geo Metro?
To replace the CV joint in a 1997 Geo Metro, start by lifting the vehicle and removing the front wheel to access the axle. Next, detach the axle nut and any necessary components, such as the brake caliper and rotor, to free the axle from the hub. Carefully pull out the axle from the transmission and remove the old CV joint, then install the new CV joint onto the axle, reassemble the components in reverse order, and ensure everything is securely tightened. Finally, lower the vehicle and test drive to confirm proper installation.
How do you replace CV boot Geo Tracker?
To replace the CV boot on a Geo Tracker, start by safely lifting the vehicle and removing the wheel on the affected side. Next, disconnect the axle from the hub by removing the retaining nut and any necessary components. Slide the CV axle out, remove the old boot clamps, and clean the CV joint before applying new grease. Finally, install the new boot, secure it with clamps, reassemble the axle, and reinstall the wheel.
What is the CV joint nut size on a 1993 Geo prism?
For my 94 Geo Prizm it's a 30mm.
How much should it cost to replace cv joint in geo prism?
Parts will cost about $100-$150 US and labor will be another 100-150 US.
How do you change the cv joint on Chevy geo prizm?
To change the CV joint on a Chevy Geo Prizm, first, lift the vehicle and remove the wheel to access the axle. Disconnect the axle nut and remove any retaining clips or bolts securing the CV joint to the transmission and suspension. Slide the CV joint off the axle, replace it with the new joint, and reassemble by following the removal steps in reverse. Finally, ensure all connections are tight and check the fluid levels before lowering the car.
What is the clicking and scraping noise you hear when you make hard right or left turns in a geo prism?
I would suggest have it checked with a "trusted mechanic".,but I would wildly guess it could be your CV-Boots worn out-or just need to replace the driving axle- which the noise coming from...hope this help!!
Front cv joint replacement Geo Tracker?
Replacing the front CV joint on a Geo Tracker involves several steps. First, safely lift and secure the vehicle, then remove the wheel and brake components to access the axle. Disconnect the axle from the hub and transmission, replace the CV joint, and reassemble all components. Ensure to torque all fasteners to the manufacturer's specifications and check for proper operation after the replacement.
Time involved cv axle on a 95 geo prism?
I just had the shop do the work. It was about 200 dollars for the parts and labor, and it only took like 45 minutes. Just save yourself the frustration and have a shop do it.
How do you change the cv boot on a geo storm?
To change the CV boot on a Geo Storm, first, safely lift the vehicle and remove the wheel to access the CV axle. Next, detach the axle from the hub and remove the old CV boot, ensuring to clean off any grease. Slide the new boot onto the axle, apply grease to the joint, and secure the boot with clamps. Finally, reassemble the axle to the hub, reinstall the wheel, and lower the vehicle.
Replace cv joint on Lincoln LS?
don't replace the joint. replace the axle
CV boot Ford Ranger how to replace?
A CV boot is found on the axle of a vehicle. To replace the outer boot remove the axle bolt and pull the boot off. The inner boot requires removal of the whole axle.
