answersLogoWhite

0

For the turn signals, or the four way flashers? It would help if you gave a model. Kenworths usually require Torx bits (T25, IIRC) to remove the panels the switches run through. You remove the panel its attached to, disconnect the switch from it, unplug the switch, and replace it. You need something more specific, I need a model.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you replace the flasher relay on a 2001 Kia Rio?

It is quite simple to replace the flasher relay switch on your 2001 Kia. The flasher relay switch simply plugs in and out.


Where is the directional flasher on a 2001 Passat and how do you replace it?

The flasher circuit is in the hazard switch in the dash.


How do you replace emergency flasher on a 2001 Monte Carlo ss?

The 2001 Monte Carlo emergency flasher relay switch and the turn signal flasher relay switch are the same. The flasher relay switch simply plugs in and out.


Where is the turn signal flasher for a 2000 Pontiac Grand Am GT?

On my 2001 it is part of the Hazard switch. You have to replace the entire switch on a 2001.


How do you replace the turn signal switch located on a 2001 VW Golf GLS?

Change the flasher first.


How do you replace the flasher on a 2001 Chevy Malibu?

The flasher is part of the hazard switch and they are replaced as a unit. Remove the trim piece from the dash. This is attached with screws in some places and press fit in others. Once the trim is loose it is a simple matter to replace the switch.


Where is the signal flasher located on a 2001 Kia Sephia?

The 2001 Kia signal flasher relay switch can be found beneath the drivers side dashboard. The signal flasher relay switch will be above the brake pedal.


Where is the turn signal flasher on a VW Beetle 2001?

The flasher is part of the hazard light switch.


Where is turn signal flasher located on a 2001 Mitsubishi mirage?

The 2001 Mitsubishi signal flasher relay switch is located beneath the drivers side dashboard. The signal flasher relay switch will be above the accelerator pedal.


How do you replace the turnhazzard flasher on 2001 VW Jetta?

the switch for hazard lght is located in the dash . the switch is the "flasher relay " so it controls the turnsignals and hazards. just pry the switch out and un plug it . install new switch . but you might want to check with your local VW dealership there is a recall on those switches . =)


On a 2001 Audi A6 where does flasher module go be hind dash?

The hazard switch is the flasher mod.


The turn signals and flasher don't work on a 2001 pt?

The flasher relay is defective, replace it.