2001 Oldsmobile Aurora brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Check, or even better replace, the wires.
Fuse and/or switch Switch located at upper end of brake pedal under dash
mine on my 97 is on the rear window deck.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
brake light on when driving oldsmobile alero
Check the brake fluid.
where is the brake light switch for 1996 Oldsmobile cutlas supreme
In an Oldsmobile Aurora, the fuse for the license plate light is typically located in the fuse box, which is usually found under the dashboard on the driver's side or in the engine compartment. Refer to the owner's manual for the exact location and designation of the fuse, as it may vary by model year. If the license plate light is not functioning, check the fuse for continuity and replace it if necessary.
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.
There is no brake light relay. There is however a brake light switch located above the brake pedal.
A warning light on the dash would illuminate.