that depends on the model year of the rodeo. If its a 92/93/94 remove the guage housing module(see how do i remove the dash board of a 93 rodeo) Once the module is out the front and rear panels of it will pop off with a screwdriver and you can replace the bulbs.
2004 3.5 Isuzu rodeo 2wd reduce power light
The check trans light may light up in an Isuzu Rodeo, because there are problems with the transmission, The light will show up on the cars dashboard.
The four wheel drive light is most Likely staying on when your Isuzu Rodeo is in two wheel drive because of a bad sensor. A licensed auto technician would be able to replace this for you.
The oil light could be blinking in an Isuzu Rodeo because it is time to get the oil changed. This could also occur if the oil is low.
4x4 indicator light
If its the bulb you have to unscrew the light cover and pull out the old bulb and put the new one in.Then screw the cover back on.
To replace the brake light on a 2000 Isuzu Rodeo, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips holding the assembly in place and gently pull it out. Twist the bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it's securely fitted. Finally, reassemble the tail light by reversing the steps and test the new brake light to ensure it works.
disconnect the battery
1157
My check engine light has been on for one month but last night my check trans light flashed off and on about 3miles till I was home. Why and what do I need to do? I have a 2000 Isuzu rodeo.
open the hood unplug the bulb from the back of the light assembly and un do the metal clip, pull bulb out of replace with a new one and reinstall
sending unit in tank