answersLogoWhite

0

To replace the turn signal on a 1999 Acura TL 3.2, first, open the hood and locate the turn signal assembly. Remove the screws or clips securing the assembly and gently pull it out. Disconnect the wiring harness, then remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the harness, and reinstall the assembly, securing it with the screws or clips.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you replace the rear turn signal on a 1999 Acura Integra?

When replacing the rear turn signal on a 1999 Acura Integra open the trunk. Locate the rear turn signal housings and find the bulbs. Remove and replace the bulbs.


How do you change the turn signal bulbs on a 99 Acura TL?

The turn signal bulbs on a 1999 Acura TL are reach through the engine compartment of the car. Find them on the side quarter panels and remove the bulbs from the clips. Replace the bulbs.


How do you troubleshoot 1995 Acura Integra turn signal flasher?

Replace flasher


How do you replace turn signal flasher and where is it located?

What kind of car 1999 mercury mountaineer


How do you replace the bulb for your turn signal on your 1999 Acura Integra?

1999 Acura Integra turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).


How to Change a front signal light - Volvo 1999 S80?

how do you replace front left turn signal on a 2001, volvo, s80


How do you change a front turn signal on a 1998 acura 2.3 cl?

To change the front turn signal on a 1998 Acura 2.3 CL, first, open the hood and locate the turn signal assembly. Remove the retaining screws or clips holding the assembly in place. Carefully pull the assembly out and disconnect the wiring harness. Replace the old bulb with a new one, reattach the assembly, and secure it with the screws or clips before testing the new turn signal.


Instructions ..How replace left turn signal lamp 1998 Acura 3.0 CL?

To replace the left turn signal lamp on a 1998 Acura 3.0 CL, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it out to access the bulb socket. Turn the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, secure the headlight assembly back in place, and test the turn signal to ensure it works.


2002 Chevy cavalier turn signal bulb replace?

How do you replace a turn signal bulb in a 1998 cavalier


Why would the s3 s4 light be blinking rapidly on a 91 acura integra?

it sounds like your turn signal relay is going out. Replace that, and you should be good.


How can you turn an Acura TL head light on and off?

You need to twist the turn signal switch.


Where is the turn signal flasher relay on a 1994 Acura Integra?

where is the flasher relay located 94 acura integra