Have the problem repaired and they will reset the light. If you DIY then disconnect the negative battery cable for 5 minutes. If that does not reset the light you will have to have it reset with an OBD2 scan tool.
To reset the check engine light on a 1997 Oldsmobile Achieva, you can disconnect the negative battery cable for about 15 minutes to clear the engine control unit's memory. Alternatively, you can use an OBD-II scanner to reset the check engine light after addressing any underlying issues. It's important to ensure that any problems triggering the light are resolved before resetting it, as the light will likely come back on if the issue persists.
You can disconnect the negative battery cable, wait a couple minutes then reconnect the cable. This will clear the codes and reset the check engine light but, if the reason the light came on isn't fixed the light will come back on soon.
To reset the check engine light on a 1999 Oldsmobile Silhouette, you can disconnect the negative battery terminal for about 15 minutes. This will clear the vehicle’s computer memory, including the check engine light. Alternatively, you can use an OBD-II scanner to erase the trouble codes that triggered the light. However, it's essential to address any underlying issues before resetting the light to avoid recurring problems.
take the battery cable off for 15 minutes
To reset the change oil light in a 2000 Oldsmobile Intrigue, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back to the "ON" position to check if the light has reset. If the light is off, the reset is successful.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
get a code scanner, or borrow one from a parts store, plug it in and clear codes
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
hoe do you reset the check engine light in a 1995 land rover
how do i reset the check engine light on a 1999 acura 3.2tl
turn off engine, and start again