To reset the dash lights in a 2001 Bravada, start by disconnecting the vehicle's battery. Remove the negative terminal and wait for about 10-15 minutes to allow the system to reset. Reconnect the battery terminal, ensuring it is secure, and then turn on the ignition to check if the dash lights have reset. If the issue persists, consult the vehicle's manual or a professional mechanic for further troubleshooting.
the slender rod that projects out from the tachometer, which is pushed to reset the trip odometer...when you turn it, the dash lights brighten or darken.
To reset the dash lights on a 2008 Chevy Aveo, first ensure the vehicle is turned off. Then, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds and turn the ignition off. This process should reset the dash lights. If the lights remain on, it may indicate a deeper issue that requires further diagnosis.
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
To reset the dash lights on a 2004 Scion xB, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, and then turn the ignition off. Restart the vehicle, and the dash lights should be reset. If the issue persists, consult the owner's manual or a professional mechanic for further assistance.
After repairing the failure that caused the code, the lights will reset themselves.
The check engine and other dash warning lights can be reset by disconnecting the vehicles battery for more then 5 minutes. If warning light continues after reconnecting battery then there is still a problem.
your question is very vague. are you refering to the drl light that come on your dash or you have fixed the issue with the module and now just want to reset it?
turn your ignition switch off and then on in rapid sucession four times dash lights will blink and code can be reset
With the key in the off position, hold down the trip odometer reset button until the dash lights start flashing. When it is all done start the car, and see if it reset.
It does have both tail lights as well as dash lights
To reset on dash board lights, you must disconnect BOTHbattery terminals and touch them together to reset all codes